References

Ague, J.J., 1994, Mass transfer during Barrovian metamorphism of pelites, South-central Connecticut. I: evidence for changes in composition and volume: American Journal of Science, v. 294, p. 989-1057.
Ailleres, Laurent & Michel Campenois, 1994, Refinements to the Fry method (1979) using image processing: Journal of Structural Geology, v. 16, p. 1327-1330.
Anderson, E.M., 1951, The dynamics of faulting: Second Edition, Oliver & Boyd, Edinburgh, 206 p.
Angelier, J., 1994, Fault slip analysis and paleostress reconstruction: in P.L. Hancock, editor, Continental deformation, Pergamon Press, p. 53-100.
Aydin, Atilla, & A.M. Johnson, 1983, Analysis of faulting in sandstones: Journal of Structural Geology, v. 5, p. 19-31.
Aydin, Atilla, & Ze'ev Reches, 1982, Number and orientation of fault sets in the field and in experiments: Geology, v. 10, p. 107-112.

Badgley, P.C., 1959, Structural methods for the exploration geologist: Harper & Row, New York, 280 p.
Badgley, P.C., 1965, Structural and tectonic principles: Harper & Row, New York, 521 p.
Balk, Robert, 1937, Structural behavior of igneous rock: Geological Society of America Memoir 5, 177 p.
Barnes, J.W., 1991, Basic geologic mapping: Second Edition, Open University Press, Milton Keynes, 118 p.
Bayly, M.B., 1971, Similar folds, buckling and great circle patterns: Journal of Geology, v. 79, p. 110-118.
Bayly, Brian, 1992, Mechanics of structural geology: Springer-Verlag, New York, 253 p.
Beach, Alastair, 1979, The analysis of deformed belemnites: Journal of Structural Geology, v. 1, p. 127-135.
Bell, A.M., 1981, Vergence: an evaluation: Journal of Structural Geology, v. 3, p. 197-202.
Bengtson, C.A., 1983, Easy solutions stereonet rotation problems: American Association of Petroleum Geologists Bulletin, v. 67, p. 706-713.
Billings, M.P., 1972, Structural geology: Third Edition, Prentice-Hall, Englewood Cliffs, N.J., 606 p. Biot, M A 1961: Theory of folding of stratified viscoelastic media and its implications in tectonics and orogenesis. Geol. Soc. Am. Bull. 72, 1595-1620
Bjørnerud, M.G., 1991, Conveying principles of finite strain with standard graphics software: Journal of Geological Education, v. 39, p. 23-27.
Borradaile, G.J., 1976, ``Structural facing'' (Shackleton's Rule) and the Palaeozoic rocks of the Malaguide Complex near Velez Rubio, SE Spain: Proceedings of the Koninklijke Nederlandse Akademie van Wetenschappen, Amsterdam, series B, v. 79, p. 330-336.
Borradaile, G.J., 1978, Transected folds: a study illustrated with examples from Canada and Scotland: Geological Society of America Bulletin, v. 89, p. 481-493.
Borradaile, G.J., 1987, Analysis of strained sedimentary fabrics: review and tests: Canadian Journal of Earth Science, v. 24, p. 442-455.
Borradaile, G.J., & J. McArthur, 1991, Tests of strain analysis by experimental deformation: Tectonophysics, v. 185, p. 325-333.
Bott, M.H.P., 1959, The mechanics of oblique-slip faulting: Geological Magazine, v. 96, p. 109-117. C. Biermeier, K. Stuwe, T.D. Barr 2000. The rotation rate of cylindrical objects during simple shear J Struct Geol pp 765-776
Burns K L and Spry A H, 1969 : Analysis of the shape of deformed pebbles. Tectonophysics, 7, 177-196
Busk, H.G., 1929, Earth flexures: Cambridge University Press, London, 106 p.
Butler, R.W.H., 1982a, Hanging wall strain: a function of duplex shape and footwall topography: Tectonophysics, v. 88, p. 235-246.
Butler, R.W.H., 1982b, The terminology in thrust zones: Journal of Structural Geology, v. 4, p. 239-245.
Butler, R.W.H., 1985, Thrust tectonics: a personal view: Geological Magazine, v. 122, p. 223-232.

Carey, S.W., 1962, Folding: Journal of the Alberta Society of Petroleum Geologists, v. 10, p. 95-144.
Casey, M., D. Dietrich & J.G. Ramsay, 1983, Methods for determining deformation history for chocolate tablet boudinage with fiberous crystals: Tectonophysics, v. 92, p. 211-239.
Célérier, Bernard, 1988, How much does slip on a reactivated fault plane constrain the stress tensor?: Tectonics, v. 7, p. 1257-1278.
Chapple, W M ,1968 : A mathematical theory of finite amplitude rock folding. Geol. Soc. Am. Bull., 79, 47-68
Charlesworth, H.A.K., C.W. Langenberg, & J. Ramsden, 1976, Determining axes, axial planes and sections of macroscopic folds using computer-based methods: Canadian Journal of Earth Science, v. 13, p. 54-65.
Chester, J.S., & F.M. Chester, 1990, Fault-propagation folds above thrusts with constant dip: Journal of Structural Geology, v. 12, p. 903-910.
Chen, R.T., 1993, Strain factorization by identical finite increments: Journal of Structural Geology, v. 15, p. 207-218.
Cloos, Ernst, 1947, Oolite deformation in South Mountain fold, Maryland: Geological Society of America Bulletin, v. 58, p. 843-917.
Cobbold, P R, Cosgrove J W and Summers, J M 1971: Development of internal structures in deformed anisotropic rocks. Tectonophysics, 12, 23-53 Cobbold, P R 1975: Fold propagation in single embedded rocks. Tectonophysics, 27, 333-351
Cobbold, P.R., & H. Quinquis, 1980, Development of sheath folds in shear regimes: Journal of Structural Geology, v. 1/2, p. 119-126.
Cosgrove, J W 1984: Structural Geology. Pergamon, 482p.
Crespi, J.M., 1986, Some guidelines for the practical application of Fry's method of strain analysis: Journal of Structural Geology, v. 8, p. 799-808.
Cruden, D.M., 1968, Methods of calculation the axes of cylindrical folds: a review: Geological Society of America Bulletin, v. 79, p. 143-148.
Cruden, D.M., 1986, The geometry of slip surfaces beneath landslides: prediction from surface measurements: discussion: Canadian Geotechnical Journal, v. 23, p. 94.
Cruden, D.M., & H.A.K. Charlesworth, 1976, Errors in strike and dip measurements: Geological Society of America Bulletin, v. 87, p. 977-980.

Dahlstrom, C.D.A., 1969, Balanced cross sections: Canadian Journal of Earth Science, v. 6, p. 743-757.
Dahlstrom, C.D.A., 1970, Structural geology in the eastern margin of the Canadian Rocky Mountains: Bulletin of Canadian Petroleum Geology, v. 18, p. 332-406.
Dahlstrom, C.D.A., 1990, Geometric constraints derived from the law of conservation of volume and applied to evolutionary models for detachment folding: American Association of Petroleum Geology Bulletin, v. 74, p. 336-344.
Davis, J.C., 1986, Statistics and data analysis in geology: Second Edition, John Wiley, New York, 646 p.
Deness, Bruce, 1972, A revised method of contouring stereograms using curvilinear cells: Geological Magazine, v. 109, p. 157-163.
Dennis, J.G., 1967, International Tectonic dictionary: American Association of Petroleum Geologists, Memoir 7, 196 p.
Den Tex, E., 1954, Stereographic distinction of linear and planar structures from apparent lineations in random exposure planes: Journal of the Geological Society of Australia, v. 1, p. 55-66.
De Paor, D.G., 1980, Some limitations of the Rf/phi technique of strain analysis: Tectonophysics, v. 64, p. T29-T31.
De Paor, D.G., 1988, Balanced sections in thrust belts, Part 1: construction: American Association of Petroleum Geologists Bulletin, v. 72, p. 73-90.
De Paor, D.G., 1991, A modern solution to the classical three-point problem: Journal of Geological Education, v. 39, p. 322-324.
De Paor, D.G., 1994, A parametric representation of ellipses and ellipsoids: Journal of Structural Geology, v. 16, p. 1331-1333.
De Paor, D.G. & D.C. Bradley, 1988, Balanced sections in thrust belts, Part 2: computerized line and area balancing: Geobyte, v. 3, p. 33-37.                                                                                                                                          de Sitter, L U 1958: Structural Geology. McGraw Hill, London, 559p.
Dewey, J F 1965: Nature and Origin of kink-bands. Tectonophysics, 1, 459-494                                       Dieterich, J H, 1970: Computer Experiments on mechanics of finite amplitude folds. Can. J. Ear. Sci., 7, 467-476
Dunne, W.M., & P.L. Hancock, 1994, Palaeostress analysis of small-scale brittle structures: in P.L. Hancock, editor, Continental deformation, Pergamon Press, p. 101-120.
Dunne, W.M., C.M. Onasch & R.T. Williams, 1990, The problem of strain-marker centers and the Fry method: Journal of Structural Geology, v. 12, p. 933-938.
Dunnet D. 1969 A technique of finite strain analysis using elliptical particles. Tectonophysics, 7, 117-136         Dunnet D and Siddans A W B 1971: Nonrandom sedimentary fabrics and their modification by strain. Tectonophysics, 12, 307-325                                                                                                                                                           Durney, D.W., & H.J. Kisch, 1994, A field classification and intensity scale for first-generation cleavages: AGSO Journal of Australian Geology & Geophysics, v. 15, p. 257-295 (see corrections v. 15, p. 539). Durney D W and Ramsay J G 1973 : Incremental Strains measured from Syntectonic Crystal Growths. In Gravity and Tectonics: Ed. deJong K A and Scholten, R. Wiley NY, 67-96
De Sitter, L.U., 1964, Structural geology: Second Edition, McGraw-Hill, New York, 551 p.
De Sitter, L.U., & H.J. Zwart, 1960, Tectonic development in supra- and infrastructures of a mountain chain: 21st International Geological Congress, Part 18, p. 248-256.
Donath, F.A., 1961, Experimental study of shear failure in anisotropic rocks: Geological Society of America Bulletin, v. 72, p. 985-990.
Donath, F.A., & R.B. Parker, 1964, Folds and folding: Geological Society of America Bulletin, v. 75, p. 45-62.
Draper, Grenville, 1984, A simple device to aid plotting of pi diagrams in structural geology: Journal of Geological Education, v. 32, p. 184-185.
Dubey, A.K., 1980, Model experiments showing simultaneous development of folds and transcurrent faults: Tectonophysics, v. 65, p. 69-84.
Dunnet, D., 1969, A technique of finite strain analysis using elliptical particles: Tectonophysics, v. 7, p. 117-136.
Dunnet, D., & A.W.B. Siddans, 1971, Non-random sedimentary fabrics and their modification by strain: Tectonophysics, v. 12, p. 307-325.

E

Elliott, David, 1965, The quantitative mapping of directional minor structures: Journal of Geology, v. 73, p. 865-880.
Elliott, David, 1970, Determination of finite strain and initial shape from deformed elliptical objects: Geological Society of America Bulletin, v. 81, p. 2221-2236.
Elliott, David, 1972, Deformation paths in structural geology: Geological Society of America Bulletin, v. 83, p. 2621-2638.
Elliott, David, 1976, Energy balance in thrusts and deformation mechanisms of thrust sheets: Proceedings of the Royal Society of London, v. A2 83, p. 289-312.
Elliott, David, 1983, The construction of balanced cross-sections: Journal of Structural Geology, v. 5, p. 101.
Elliott, David, & M.R.W. Johnson, 1980, Structural evolution in the northern part of the Moine thrust belt, NW Scotland: Transactions of the Royal Society of Edinburgh: Earth Sciences, v. 71, p. 69-96.
Engelder, Terry, 1994, Brittle crack propagation: in P.L. Hancock, editor, Continental deformation, Pergamon Press, p. 43-52.
Engelder, Terry, 1999, Transitional-tensile fracture propagation: a status report: Journal of Structural Geology, v. 21, p. 1049-1055.
Erslev, E.A. & Hongxing Ge, 1990, Least-squares center-to-center and mean object ellipse fabric analysis: Journal of Structural Geology, v. 12, p. 1047-1059.

F

Fairbairn, H.W., 1949, Structural petrology of deformed rocks: Addison-Wesley, Cambridge, 344 p.
Ferguson, C.C., 1981, A strain reversal method for estimating extension from fragmented rigid inclusions: Tectonophysics, v. 79, p. T43-T52.
Ferguson, C.C., 1987, Fracture and separation histories of stretched belemnites and other rigid-brittle inclusions in tectonites: Tectonophysics, v. 139, p. 255-273.
Ferguson, C.C., & G.E. Lloyd, 1984, Extension analysis of stretched belemnites: a comparison of methods: Tectonophysics, v. 101, p. 199-206.
Ferguson, H.G., & S.W. Muller, 1949, Structural geology of the Hawthorne and Tonopah quadrangles, Nevada: U.S. Geological Survey Professional Paper 216, 55 p.
Fletcher, R.C., & D.D. Pollard, 1999, Can we understand structural and tectonic processes and their products without appear to a complete mechanics?: Journal of Structural Geology, v. 21, p. 1071-1088.
Fleuty, M.J., 1964, The description of folds: Proceedings of the Geologists Association, v. 75, p. 461-492.
Fleuty, M.J., 1974, Slickensides and slickenlines: Geological Magazine, v. 112, p. 319-322.
Fleuty, M.J., 1987a, Folds and folding: in C.K. Seyfert, editor, The Encyclopedia of Structural Geology and Plate Tectonics, Van Nostrand Reinhold Co., New York, p. 249-270.
Fleuty, M.J., 1987b, Slikensides and slikenlines: in C.K. Seyfert, editor, The Encyclopedia of Structural Geology and Plate Tectonics, Van Nostrand Reinhold Co., New York, p. 729-731. Flinn D. 1962 On folding during three dimensional progressive deformation. Quart. J. Geol. Soc. London, 118, 385-428
Flinn, Derek, 1965, On the symmetry principle and the deformation ellipsoid: Geological Magazine, v. 102, p. 35-45.
Ford, Mary, & C.C. Ferguson, 1985, Cleavage strain in the Variscan Fold Belt, County Cork, Ireland, estimated from stretched arsenopyrite rosettes: Journal of Structural Geology, v. 7, p. 217-223.
Forsyth, D.W., 1992, Finite extension and low-angle normal faulting: Geology, v. 20, p. 27-30.
Fry, Norman, 1979a, Random point distributions and strain measurements in rocks: Tectonophysics, v. 60, p. 89-105.
Fry, Norman, 1979b, Density distribution techniques and strain length methods for determination of finite strains: Journal of Structural Geology, v. 1, p. 221-229. N. Fry 2000: Stress space: striated faults, deformation twins, and their constraints on paleostress J Struct Geol pp 1-9

G
Gay N C 1968 :The determination of total finite strain in a rock using objects such as deformed pebbles. Tectonophysics, 5, 295-305
Geiser, J., P.A. Geiser, Roy Kligfield, R. Ratliff & M. Rowan, 1988, New applications of computer-based section construction: strain analysis, local balancing, and subsurface fault prediction: The Mountain Geologist, v. 25, p. 47-59.
Geiser, P.A., 1988, The role of kinematics in the construction and analysis of geological cross sections in deformed terranes: in Gautam Mitra & Steven Wojtal, editors, Geometries and mechanisms of thrustings, with special reference to the Appalachians, Geological Society of America Special Paper 222, p. 47-76.
Ghaleb, A.R., & Normal Fry, 1995, CSTRAIN: a FORTRAN 77 program to study Fry's plots in two-dimensional simulated models: Computers & Geosciences, v. 21, p. 825-831. Ghosh, S K ,1968: Experiments of buckling of folds which permit interlayer gliding. Tectonophysics, 6,207-250 Ghosh, S K 1993: Structural Geology, Fundamentals and Modern develpments. Pergamon, 600p. Ghosh S K and Sengupta S. 1973: Compression and simple shear of test models with rigid and deformable inclusions. Tectonophysics, 17, 133-175
Goguel, Jean, 1962, Tectonics: Freeman, San Francisco, 384 p.
Gray, D.R., & D.W. Durney, 1979, Investigations on the mechanical significance of crenulation cleavage: Tectonophysics, v. 58, p. 35-79.
Groshong, R.H., Jr., 1990, Unique determination of normal fault shape from hanging-wall bed geometry in detached half grabens: Eclogae geologicae Helvetiae, v. 83, p. 455-471.
Groshong, R.H., Jr., 1994, Area balance, depth to detachment, and strainin extension: Tectonics, v. 13, p. 1488-1497.
Groshong, R.H., Jr., & J.-L. Epard, 1994, The role of strain in area-constant detachment faulting: Journal of Structural Geology, v. 16, p. 613-618.
Groshong, R.H., Jr., 1999, 3-D Structural Geology: Springer, Berlin, 324 p. A. Gupta, C.H. Scholz 2001: A model of normal fault interaction based on observations and theory J Struct Geol pp 865-879

Hafner, W., 1951, Stress distribution and faulting: Geological Society of America Bulletin, v. 62, p. 373-398.
Hancock, P L 1992: Continental Deformation, Pergamon, 560p. Hanmer, S 1986 :Asymmetrical pul-aparts and foliation fish as kinematic Indicators. J Struct Geol. 8, 327-345 S. Hanmer 2001:Matrix mosaics, brittle deformation, and elongate porphyroclasts: granulite facies microstructures in the Striding-Athabasca mylonite zone, western Canada J Struct Geol. pp 947-967
Handin, John, 1969, On the Coulomb-Mohr failure criterion: Journal of Geophysical Research, v. 74, p. 5343-5349.
Haneberg, W.C., 1990, A Lagrangian interpolation method for three-point problems: Journal of Structural Geology, v. 12, p. 945-948.
Hardcastle, K.C., 1989, Possible paleostress tensor configurations derived from fault-slip data in eastern Vermont and western New Hampshire: Tectonics, v. 8, p. 256-284.
Harker, Alfred, 1885, On slaty cleavage and allied rock structures, with special reference to the mechanical theories of their origin: British Association for the Advancement of Science Report, p. 813-852.
Hill, E.S., 1972, Elements of structural geology: second edition, John Wiley & Sons, Inc., New York, 502 p.
Hobbs, B.E., W.D. Means, & P.F. Williams, 1976, An outline of structural geology: John Wiley, New York, 571 p.
R.J. Holcombe, T.A. Little 2000:A sensitive vorticity gauge using rotated porphyroblasts, and its application to rocks adjacent to the Alpine Fault, New Zealand. pp 979-989
Holdsworth, R.E., 1988, The stereographic analysis of facing: Journal of Structural Geology, v. 10, p. 219-223.
Hossack J R, 1968 : Pebble deformation and thrusting in the Bygdin Area, Soroy, Southern Norway. Tectonophysics, 5, 315-339
Hossack, J.R., 1979, The use of balanced cross-sections in the calculation of orogenic contraction: a review: Journal of the Geological Society of London, v. 136, p. 705-711.
Hossain, K.M., 1979, Determination of strain from stretched belemnites: Tectonophysics, v. 88, p. 279-288.
Howard, J.H., 1993, Restoration of cross-sections through unfaulted, variably strained strata: Journal of Structural Geology, v. 15, p. 1331-1342.
Hsu, T C 1966: The characteristics of coaxial and noncoaxial strain paths. J Strain Ana. 1, 216-222
Hsü, K.J., 1968, Principles of melanges and their bearing on the Franciscan-Knoxville paradox: Geological Society of America Bulletin, v. 79, p. 1063-1074.
Hubbert, M.K., 1931, Graphic solution of strike and dip from two angular components: American Association of Petroleum Geologist Bulletin, v. 15, p. 283-2862.
Hubbert, M.K., 1951, Mechanical basis for certain familiar geologic structures: Geological Society of America Bulletin, v. 62, p. 365-372.
Hudleston, P.J., 1973, Fold morphology and some implications of theories of fold development: Tectonophysics, v. 16, p. 1-46. Hudleston, P J, 1973b: An analysis of single layer folds developed experimentally in viscous media. Tectonophysics, 16, 89-132
Hudleston, P.J., 1986, Extracting information from folds in rocks: Journal of Geological Education, v. 34, p. 237-245.
Hudleston, P.J., & O. Stephansson, 1973, Layer shortening and fold shape development in the buckling of single layers: Tectonophysics, v. 17, p. 299-321.
Hudleston, P.J., & Labao Lan, 1993, Information from fold shapes: Journal of Structural Geology, v. 15, p. 253-264.
Hudleston, P.J., & Labao Lan, 1994, Rheological controls on the shape of single-layer folds: Journal of Structural Geology, v. 16, p. 1007-1021.

Ickes, E.L., 1923, Similar, parallel and neutral surface types of folding: Economic Geology, v. 18, p. 575-591.
Ickes, E.L., 1925, The determination of formation thickness by the method of graphical integration: American Association of Petroleum Geologists Bulletin, v. 9, p. 451-463.
Ickes, E.L., 1934, Formulas for calculating stratigraphic thickness exposed between two dips: American Association of Petroleum Geologists Bulletin, v. 18, p. 139-142. Illies.E. 1970 Graben Problems Springer Verlag 405p.

Jaeger, J.C., 1969, Elasticity, fracture and flow: Third Edition, Methuen, London, 268 p.
Johnson, A.M., 1970, Physical processes in geology: Freeman, Cooper & Company, San Francisco, 577 p.
Jolly, R.J.H., & D.J. Sanderson, 1997, A Mohr circle construction for the opening of a pre-existing fracture: Journal of Structural Geology, v. 19, p. 887-892.
Jones, P.B., 1987, Quantitative geometry of thrust and fold belt structures: Methods in Exploration Series No. 6, American Association of Petroleum Geologists, 26 p.
Jones, T.A., D.E. Hamilton & C.R. Johnson, 1986, Contouring geologic surfaces with the computer: Van Nostrand Reinhold, New York, 314 p.

K

Kanagawa, K., 1990, Automated two-dimensional strain analysis using deformed elliptical markers using an image analysis system: Journal of Structural Geology, v. 12, p. 139-143.
Kilby, W.E., & H.A.K. Charlesworth, 1980, Computerized downplunge projection and the analysis of low-angle thrust-faults in the Rocky Mountain Foothills of Alberta, Canada: Tectonophysics, v. 66, p. 287-299.
Krajewski, S.A., & B.L. Gibbs, 1996, Understanding Contouring: Gibbs Associates, Boulder, Colorado, 75 p.
Kraus, P.F. Williams 2000 A new spin on 'non-rotating' porphyroblasts: implications of cleavage refraction and reference frames. J Struct Geol.pp 963-971
Kretz, Ralph, 1991, The dilation direction of intrusive sheets: Journal of Structural Geology, v. 13, p. 97-99.
Kutty, T.S., & Sojen Joy, 1994, RFPHI -- a program in TURBOC for the diagram method of two-dimensional strain analysis: Computers & Geosciences, v. 20, p. 247-263.

L

Langenberg, Willem, Henry Charlesworth, & Allan La Rivier, 1988, Computer-constructed cross-section of the Morcles Nappe: Eclogae geologicae Helvetiae, v. 80, p. 655-667.
La Pointe, P.R., & J.A. Hudson, 1985, Characterization and interpretation of rock mass joint patterns: Geological Society of America Special Paper 199, 37 p.
Laubscher, H.P., 1977, Fold development in the Jura: Tectonophysics, v. 37, p. 337-362.
Leyshon, P.R., & R.J. Lisle, 1996, Stereographic projection techniques in structural geology: Butterworth-Heinemann, Ltd., Oxford, 104 p.
Lisle, R.J., 1977, Clastic grain shape and orientation in relation to cleavage from the Aberystwyth grits, Wales: Tectonophysics, v. 39, p. 381-395.
Lisle, R.J., 1980, A simplified work scheme for using block diagrams with the orthographic net: Journal of Geological Education, v. 29, p. 81-83.
Lisle, R.J., 1985a, Geological Strain Analysis -- a manual for the method: Pergamon Press, Oxford, 99 p.
Lisle, R.J., 1985b, The facing of faults: Geological Magazine, v. 122, p. 249-251.
Lisle, R.J., 1988, Geologic structures and maps: Pergamon Press, Oxford, 150 p.
Lisle, R.J., 1990, Principal stress orientation from faults: an additional constraint: Annales Tectonicæ, v. 1, p. 155-158.
Lisle, R.J., 1991, Strain analysis by simplified Mohr constructions: Annales Tectonicæ, v. 5, p. 102-117.
Lisle, R.J., 1992a, Least squares best-fit circles (with applications to Mohr's circles): Mathematical Geology, v. 24, p. 455-461.
Lisle, R.J., 1992b, Strain estimation from flattened buckle folds: Journal of Structural Geology, v. 14, p. 369-371.
Lisle, R.J., 1994a, Detection of zone of abnormal strains in structures using Gaussian curvature analysis: American Association of Petroleum Geologists Bulletin, v. 78, p. 1811-1819.
Lisle, R.J., 1994b, Paleostrain analysis: in P.L. Hancock, editor, Continental deformation, Pergamon Press, p. 28-42.
Lisle, R.J., & D.M. Ragan, 1988, Strain from three stretches --a simple method: Journal of Structural Geology, v. 10, p. 905-906.
Lisle, R.J., & J.M. Robinson, 1995, The Mohr circle for curvature and its application to fold description: Journal of Structural Geology, v. 17, p. 739-750.
Lisle, R.J., P. Styles & S.J. Freeth, 1990, Fold interference structures: the influence of layer competence contrast: Tectonophysics, v. 172, p. 197-200.
Lister, G.S., & P.F. Williams, 1983, The partitioning of deformation in flowing rock masses: Tectonophysics, v. 92, p. 1-33.
Lloyd, G.E., C.C. Ferguson & K. Reading, 1982, A stress-transfer model for the development of extensional fracture boudinage: Journal of Structural Geology, v. 4, p. 355-372.

Back to the alphabets options

M

MacCaskie, D.R., 1986, Rapid field estimation of the degree of preferred orientation of elongate features: Journal of Geology, v. 94, p. 777-778.
Maltman, Alex, 1994, Prelithification deformation: in P.L. Hancock, editor, Continental deformation, Pergamon Press, p. 143-158.                                                                                                                                                             N. Mandal, C. Chakraborty, S. Kumar Samanta 2000: Flattening in shear zones under constant volume: a theoreticalevaluation J Struct Geol                                                                                                                              N. Mandal, C. Chakraborty, S. Kumar Samanta 2001: Controls on the failure mode of brittle inclusions hosted in a ductile matrix. J Struct Geol. pp 51-66.                                                                                                             Mandal, N, S. Kumar Samanta, C. Chakraborty 2001:Progressive development of mantle structures around elongate porphyroclasts: insights from numerical models J Struct Geol pp 993-1008                                                                 N. Mandal, C. Chakraborty, S.K. Samanta 2001: An analysis of anisotropy of rocks containing shape fabrics of rigid inclusions:J Struct Geol, pp 831-839
N Mandal, C Chakraborty, SK Samanta 2001: Boudinage in multilayered rocks under layer-normal compression: a theoretical analysis:J Struct Geol pp 373-382
Marshak, Stephen & Nicholas Woodward, 1988, Introduction to cross-section balancing: in Stephen Marshak & Gautam Mitra, editors, Basic methods of structural geology, Prentice-Hall, Englewood Cliffs, New Jersey, p. 303-332.
Martel, S.J., 1999, Mechanical controls on fault geometry: Journal of Structural Geology, v. 21, p. 585-596.
Matthews, P.E., R.A.B. Bond, & J.J. Van den Berg, 1974, Analysis and structural implications of a kinematic model of similar folding: Tectonophysics, v. 12, p. 129-154.
McClay, K.R., 1987, The mapping of geologic structures: Geological Society of London Handbook Series, Open University Press, Milton Keynes, 161 p.
McCoss, A.M., 1987, Practical section drawing through folded layers using sequentially rotated cubic interpolators: Journal of Structural Geology, v. 9, p. 365-370.
McIntyre, D.B., & L.E. Weiss, 1956, Construction of block diagrams to scale in orthographic projection: Proceedings of the Geologists Association, v. 67, p. 145-155.
McLeish, A.J., 1971, Strain analysis of deformed pipe rock in the Moine thrust zone, northwest Scotland: Tectonophysics, v. 12, p. 469-503.
McNaught, Mark, 1994, Modifying the normalized Fry method for aggregates of non-elliptical grains: Journal of Structural Geology, v. 16, p. 493-503.
Means, W.D., 1976, Stress and strain -- Basic concepts of continuum mechanics for geologists: Springer-Verlag, New York, 339 p.
Means, W.D., 1987, A newly recognized type of slickenside striations: Journal of Structural Geology, v. 9, p. 585-690.
Means, W.D., 1990, Kinematics, stress, deformation and material behavior: Journal of Structural Geology, v. 12, p. 953-971.
Means, W.D., 1995, Shear zones and rock history: Tectonophysics, v. 247, p. 157-160.
Means, W.D., 1996, How to do anything with Mohr Circles -- a short course about tensors for structural geologists: Short Course Workbook, Geological Society of America, 66 p.                                                                           W.D. Means, T. Li 2000 A laboratory simulation of fibrous veins: some first observations J Struct Geol pp 857-863
Michael, A.J., 1984, Determination of stress from slip data: faults and folds: Journal of Geophysical Research, v. 89, p. 11517-11526.
Middleton, G.V., 2000, Data analysis in the Earth Sciences using Matlab: Prentice-Hall, Inc., Upper Saddle River, New Jersey, 260 p.
Milnes, A.G., 1977, A model for analysing the strain history of folded competent layers in deeper parts of orogenic belts: Eclogae geologicae Helvetiae, v. 64, p. 335-342.                                                                                          Mitra S 1978 : Microscopic deformation Mechanisms and flow laws in quartzites in the S Mountain Anticline. J Geol. 86, 129-152
Mitra, Shankar, 1992, Balanced structural interpretations in fold and thrust belts: in Shankar Mitra & G.W. Fisher, editors, Structural Geology of Fold and Thrust Belts, Johns Hopkins University Press, Baltimore, p. 53-77.
Mitra, Shankar, & Jay Namson, 1989, Equal-area balancing: American Journal of Science, v. 289, p. 563-599.
Mountjoy, E.W., 1992, Significance of rotated folds and thrust faults, Alberta Rocky Mountains: in Shankar Mitra & G.W. Fisher, editors, Structural Geology of Fold and Thrust Belts, Johns Hopkins University Press, Baltimore, p. 207-223.
Mukhopadhyay, D 1973: Strain measurements from deformed quartz grains in the slaty rocks from the Ardennes and the Northern Eifel. Tectonophysics , 16, 279-296                                                                                              M. Mukul 2000: The geometry and kinematics of the Main Boundary Thrust and related neotectonics in the Darjiling Himalayan fold-and-thrust belt, West Bengal, India J Struct Geol. pp 1261-1283

N
Nadai, A., 1950, Theory of flow and fracture of solids, Volume 1: Second Edition, McGraw-Hill, New York, 572 p. Naha K and Choudhari A K, 1968: Large scale fold interference in a metamorphic-migmatiticcomplex. Tectonophysics, 6, 127-142
Narr, Wayne & John Suppe, 1994, Kinematics of basement-involved compressive structures: American Journal of Science, v. 294, p. 802-860.

Odling, N., 1987, The determination of `buckling rotation' and its application to theoretical and experimental models of buckle folds: Journal of Structural Geology, v. 9, p. 1021-1028.
O'Driscoll, E.S., 1962, Experimental patterns in superposed similar folding: Journal of the Alberta Society of Petroleum Geologists, v. 10, p. 145-167.
O'Driscoll, E.S., 1964, Cross fold deformation by simple shear: Economic Geology, v. 59, p. 1061-1093.
Oertel, Gerhard, 1962, Extrapolation in geologic fabrics: Geological Society of America Bulletin, v. 73, p. 325-342.
Oertel, Gerhard, 1996, Stress and deformation -- a handbook on tensor in geology: Oxford University Press, New York, 292 p.
O'Hara, K.D., 1994, Fluid-rock interaction in crustal shear zones: a directed percolation approach: Geology, v. 22, p. 843-846.

P

Panozzo, Renée, 1984, Two-dimensional strain from the orientation of lines in a plane: Journal of Structural Geology, v. 6, p. 215-221.
Panozzo, Renée, 1987, Two-dimensional strain determination by the inverse SURFOR wheel: Journal of Structural Geology, v. 9, p. 115-119.
Passchier, C.W., & R.A.J. Trouw, 1996, Microtectonics: Springer-Verlag, Berlin, 289 p.
Peach, C.J., & R.J. Lisle, 1979, A FORTRAN IV program for the analysis of tectonic strain using deformed elliptical markers: Computers & Geoscience, v. 5, p. 325-334. Paterson, M S and Weiss, L E ,1966: Experimental deformation and folding in phyllite. Geol. Soc. Am. Bull., 77, 343-374
Peacock, D.C.P., R.J. Knipe & D.J. Sanderson, 2000, Glossary of normal faults: Journal of Structural Geology, v. 22, p. 291-305.
Pfiffner, O.A., 1981, Fold-and-thrust tectonics in the Helvetic Nappes (E Switzerland): in K.R. McClay & N.J. Price, editors, Thrust and nappe tectonics, Special Publication No. 9, Geological Society of London, p. 319-327.
Pfiffner, O.A., & J.G. Ramsay, 1982, Constraints on geological strain rates: arguments from finite strain states of naturally deformed rocks: Journal of Geophysical Research, v. 87, p. 311-321.
Phillips, F.C., 1971, The use of stereographic projection in structural geology: Third Edition, Edward Arnold, London, 90 p.
Phillips, W.E.A., & J.G. Byrne, 1969, The construction of sections in areas of highly deformed rocks: in P.E. Kent, G.E. Satterthwaite & A.M. Spencer, editors, Time and Place in Orogeny, Special Publication No. 3, Geological Society of London, p. 81-93.
Platt, L.B., 1988, Interpretation of geologic maps: in Stephen Marshak & Gautam Mitra, editors, Basic methods of structural geology, Prentice-Hall, Englewood Cliffs, New Jersey, p. 177-192.
Poblet, Josep & Ken McClay, 1996, Geometry and kinematics of single-layer detachment folding: American Association of Petroleum Geologists Bulletin, v. 80, p. 1085-1109.
Pollard, D.D., S.D. Saltzer & A.M. Rubin, 1993, Stress inversion methods: are they based on faulty assumptions?: Journal of Structural Geology, v. 15, p. 1045-1054.
Powell, C.McA., 1974, Timing of slaty cleavage during folding of Precambrian rocks, northwest Tasmania: Geological Society of America Bulletin, v. 85, p. 1043-1060.
Price, N.J., 1966, Fault and joint development in brittle and semi-brittle rocks: Pergamon, Oxford, 176 p.
Price, N.J., 1970, Laws of rock behavior in the earth's crust: in W.H. Somerton, editor, Rock mechanics -- theory and practice, Procedings of the 11th Symposium on Rock Mechanics, American Institute Mining, Metallurgical and Petroleum Engineering, New York, p. 3-23.
Price, N.J., 1974, The development of stress systems and fracture patterns in undeformed sediments: Proceedings, Third Rock Mechanics Congress, International Society of Rock Mechanics, v. 1, p. 487-496.
Price, N.J., 1975, Rates of deformation: Journal of the Geological Society, v. 131, p. 553-575.
Price, N.J., & J.W. Cosgrove, 1990, Analysis of geologic structures: Cambridge University Press, Cambridge, 502 p.
R.A. Price, 2000: An evaluation of models for the kinematic evolution of thrust and fold belts: structural analysis of a transverse fault zone in the Front Ranges of the Canadian Rockies north of Banff, Alberta. pp 1079-1088

R
Ragan, D.M., 1969a, Introduction to concepts of two-dimensional strain and their application with the use of card-deck models: Journal of Geological Education, v. 17, p. 135-141.
Ragan, D.M., 1969b, Structures at the base of an ice fall: Journal of Geology, v. 77, p. 647-667.
Ragan, D.M., & M.F. Sheridan, 1972, Compaction of the Bishop Tuff, California: Geological Society of America Bulletin, v. 83, p. 95-106.
Ragan, D.M., 1987, Strain from three measured stretches: Journal of Structural Geology, v. 9, p. 897-898.
Ragan, D.M., & R.H. Groshong, Jr., 1993, Strain from two angles of shear: Journal of Structural Geology, v. 15, p. 1359-1360.
Ramberg H 1961Contact strain and folding instability of a body under compression. Geol. Rundsch. 51, 405 - 439 Ramberg H 1975 : Particle paths, displacement and progressive strain applicable to rocks. Tectonophysics, 28, 1-37
Ramberg, Hans, 1987, Drag Folds: in C.K. Seyfert, editor, The Encyclopedia of Structural Geology and Plate Tectonics, Van Nostrand Reinhold Co., New York, p. 206.                                                                            Ramberg H and Ghosh S K 1977: Rotation and strain of linear and planar structures in three dimensional progressive deformation. Tectonophysics, 40, 309-337                                                                                                    Ramsay, J G 1958: Superimposed folding at Loch Monar, Inverness-shire and Ross-shire. Q. Jour. Geol. Soc. London, 113, 271-308
Ramsay, J.G., 1961, The effects of folding upon the orientation of sedimentary structures: Journal of Geology, v. 69, p. 84-100.
Ramsay, J.G., 1962, Interference patterns produced by the superposition of folds of similar type: Journal of Geology, v. 70, p. 466-481.
Ramsay, J,G., 1962, The geometry and mechanics of formation of ``similar'' type folds: Journal of Geology, v. 70, p. 309-327.
Ramsay, J.G., 1963, Structure and metamorphism of the Moine and Lewisian Rocks of the Northwest Caledonides: in M.R.W. Johnson & F.H. Stewart, editors, The British Caledonides, Oliver and Boyd, Edinburgh, p. 143-175.
Ramsay, J.G., 1964, The uses and limitations of beta-diagrams and pi-diagrams in the geometrical analysis of folds: Quarterly Journal of the Geological Society, v. 120, p. 435-454.
Ramsay, J.G., 1967, Folding and fracturing of rocks: McGraw-Hill, New York, 568 p.
Ramsay, J.G., 1969, The measurement of strain and displacement in orogenic belts: in P.E. Kent, G.E. Satterthwaite & A.M. Spencer, editors, Time and place in Orogeny, Special Publication No. 3, Geological Society of London, p. 43-79.                                                                                                                                                            Ramsay, J G 1974: Development of Chevron Folds. Geol. Soc. Am. Bull., 85, 1741-1754
Ramsay, J.G., 1976, Displacement and strain: in J.G. Ramsay & D.S. Wood, editors, A discussion on natural strain and geologic structures: Philosophical Transactions of the Royal Society, London, v. 283A, p. 3-25.
Ramsay, J.G., 1980, Shear zone geometry: a review: Journal of Structural Geology, v. 2, p. 83-99.
Ramsay, J.G., 1992, Some geometric problems of ramp-flat thrust models: in K.R. McClay, editor, Thrust tectonics, Chapman & Hall, London, p. 191-200.
Ramsay, J.G., & M.I. Huber, 1983, The techniques of modern structural geology -- Volume 1: strain analysis: Academic Press, London, p. 1-307.
Ramsay, J.G., & M.I. Huber, 1987, The techniques of modern structural geology -- Volume 2: folds and fractures: Academic Press, London, p. 308-700.                                                                                                               Ramsay J G and Wood D S 1973: The geometric effects of volume change during deformation processes. Tectonophysics, 16, 263-277                                                                                                                           Ramsay J G and Lisle R J 2000:Modern Structural Geology, Volume 3: Applications of Continuum Mechanics in Structural Geology. Academic Press, London 560p.
Reches, Ze'ev, 1987, Determination of the tectonic stress tensor from slip along faults that obey the Coulomb yield condition: Tectonics, v. 6, p. 849-861.
Reches, Ze'ev & D.A. Lockner, 1994, Nucleation and growth of faults in brittle rocks: Journal of Geophysical Research, v. 99, p. 18159-18173.
Rickard, M.J., 1971, A classification diagram for fold orientation: Geological Magazine, v. 108, p. 23-26.
Rickard, M.J., 1972, Fault classification -- discussion: Geological Society of America Bulletin, v. 83, p. 2545-2546.
Roberts, Alan & Graham Yielding, 1994, Continental extension tectonics: in P.L. Hancock, editor, Continental deformation, Pergamon Press, p. 223-250.                                                                                                         Roday, P. P. 1979: Structural pattern in the Ajabgarh rocks around Anakhar, Central Rajasthan. J Geol Soc Ind. pp.441-452                                                                                                                                                        Roday, P. P. 1983. Aspects of syntectonic crystal growth and the role of shear in modification from the Precambrian rocks near Omkareswar, Barwaha district, M.P., India. J.Geol.Soc. Ind. v.34, pp.23-38                                                                                                                                                            Roday, P P, Chourasia, L P and Chaudhari S. 1989: Geometry and analysis of shear zones and faults in the granitic basement at Hirapur and its influence on shearing, folding and faulting in the overlying Bijawar rocks. J Geol Soc Ind. pp.40-70.                                                                                                                                                           Roday, P. P. and Singh, S. 1998. Palaeostress analysis of heterogeneous fault sets in the Bundelkhand granitoids, separation into homogeneous subsets and comparison with finite strains. In: The Indian Precambrian. Ed. B S Paliwal, Scientific Publishers, Jodhpur, pp. 34-54                                                                                                             Roday, P P. and Mawale, Y K.2000: Role of shear in influencing pluton shape and finite strains: Untala granite, East Central Rajasthan. Proc, Ind Geol Cong.
Rowland, S.M., & E.M. Duebendorfer, 1994, Structural analysis and synthesis: Second Edition, Blackwell Scientific Publications, Palo Alto, 279 p.

S
Sander, Bruno, 1948, Einführung in die Gefügekunde der geologischen Körper, Erster Teil, allgemeine Gefügekunde und Arbeiten im Bereich Handstück bis Profile: Springer-Verlag, Vienna, 215 p.
Sander, Bruno, 1970, An introduction to the study of fabrics of geological bodies: Pergamon Press, Oxford, 641 p.
Schedl, Andrew & B.A. van der Pluijm, 1988 A review of deformation microstructures:; Journal of Geological Educations, v. 36. p. 111-121.
Scholz, C.H., 1992, The brittle-plastic transition and the depth of seismic faulting: Geologische Rundschau, v. 77, p. 319-328.
Sherwin J A and Chapple W M 1968 : Wavelengths of single layer folds: a comparison between theory and observation. Am. J. Sci., 266, 167-179
Schwerdtner, W.M., 1978, Determination of stratigraphic thickness of strained units: Canadian Journal of Earth Science, v. 15, p. 1379-1380.
Schwerdtner, W.M., P.J. Bennett, & T.W. Janes, 1977, Application of L-S fabric scheme to structural mapping and paleostrain analysis: Canadian Journal of Earth Science, v. 14, p. 1021-1032.
Sellés-Mart´, Jose, 1993, A common misinterpretation of the equal-area properties: Journal of Structural Geology, v. 15, p. 1261-1353.
Seymour, D.B., & C.A. Boulter, 1979, Tests of computerised strain analysis by the analysis of simulated deformation of natural unstrained sedimentary fabrics: Tectonophysics, v. 58, p. 221-235.
Shackleton, R.M., 1958, Downward-facing structures of the Highland Border: Quarterly Journal of the Geological Society of London, v. 113, p. 361-392.
Shaw, J.H., S.C. Hook & John Suppe, 1994, Structural trend analysis by axial surface mapping: American Association of Petroleum Geologists Bulletin, v. 78, p. 700-721.
Shorrock, Christopher & R.J. Lisle, 1998, Datacon: A Quickbasic program to reformat orientation from faults: Computers & Geosciences, v. 24, p. 585-590.
Sibson, R.H., 1974, Frictional constraints on thrust, wrench and normal faults: Nature (Physical Sciences), v. 249, p. 542-543.
Sibson, R.H., 1981, Fluid flow accompanying faulting: field evidence and models: in D.W. Simpson & P.G. Richards, editors, Earthquake prediction -- an international review: Maurice Ewing Series 4, American Geophysical Union, p. 593-603.
Sibson, R.H., 1985, A note on fault reactivation: Journal of Structural Geology, v. 6, p. 751-754.
Simpson, Carol, 1988, Analysis of two-dimensional strain: in Stephen Marshak & Gautam Mitra, editors, Basic methods of structural geology, Prentice-Hall, Englewood Cliffs, New Jersey, p. 333-359.
Simpson, Carol, & S.M. Schmid, 1983, An evaluation of criteria to deduce the sense of movement in sheared rocks: Geological Society of America Bulletin, v. 94, p. 1281-1288.
Sitter, L.U. de, 1958, Bouding and parasitic folds in relation to cleavage and folding: Geologie en Mijnbouw, v. 20, p. 277-286.
Snoke, A.W., Jan Tullis & V.R. Todd (editors): Fault-related rocks -- a photographic atlas: Princeton University Press, Princeton, New Jersey, 617 p.
Sprenke, K.F., 1992, Analytic geometry formulas and computer routines for stereonet problems: Journal of Geological Education, v. 40, p. 109-115. D.C. Srivastava 2000: Geometrical classification of conjugate vein arrays J Struct Geol pp 713-722
Srivastava, H.B., 1995, Two dimensional strain estimation from weakly deformed rocks: Annales Tectonicæ, v. 9, p.3-6. Stabler, C L, 1968: Simplified Fourier analysis of fold shapes. Tectonophysics, 6, 343-350
Stewart, I.S, & P.L. Hancock, 1990, What is a fault scarp?: Episodes, v. 13, p. 256-236.
Suppe, John, 1983, Geometry and kinematics of fault-bend folding: American Journal of Science, v. 283, p. 684-721.
Suppe, John, 1985, Principles of structural geology: Prentice-Hall, Englewood Cliffs, New Jersey, 537 p.
Swan, A.R.H., & M. Sandilands, 1995, Introduction to geological data analysis: Blackwell Science Ltd., Oxford, 446 p.

T
Talbot, C.J., 1970, The minimum strain ellipsoid using deformed quartz veins: Tectonophysics, v. 9, p. 47-76.
Tauxe, L., & G.S. Watson, 1994, The fold test: an eigen analysis approach: Earth and Planetary Science Letters, v. 122, p. 331-341.
Tewksbury, B.J., 1996, Using graphics programs to help students understand strain: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 57-73.
Thiessen, R.L., & W.D. Means, 1980, Classification of fold interference patterns: a reexamination: Journal of Structural Geology, v. 2, p. 311-316.
Thompson, R.I., 1981, The nature and significance of large `blind' thrusts within the northern Rocky Mountains of Canada: in K.R. McClay & N.J. Price, editors, Thrust and Nappe Tectonics, Geological Society of London, Special Publication No. 9, p. 449-462.
Threet, R.L., 1973a, Classification of translational fault slip: Geological Society of America Bulletin, v. 84, p. 1825-1828.
Tikoff, Basil & Haakon Fossen, 1996, Visualization of deformation: computer applications for teaching: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 75-96.
Tikoff, Basil, Christian Teyssier & Haakon Fossen, 1993, Computer applications for teaching general two-dimensional deformation: Journal of Geological Education, v. 41, p. 425-432.
Tjia, H.D., 1964, Slickensides and fault movements: Geological Society of America Bulletin, v. 75, p. 683 - 686. Tobisch, O T, 1966: Large scale basin and dome pattern resulting from the interference of major folds. Geol. Soc. Am. Bull., 77, 393-408
Tolson, Gustavo & Francisco Correa-Mora, 1996, Manipulation of orientation data using spreadsheet software: in D.G. De Paor, editor, Structural geology and personal computers, Pergamon, Oxford, p. 237-243.
Treagus, S H 1973: Buckling stability of a single layer oblique to principal compression, Tectonophysics, 19, 271-289
Treagus, S.H., 1981, A simple-shear construction from Thomsom & Tait (1867): Journal of Structural Geology, v. 3, p. 291-293.
Treagus, S.H., 1982, A new isogon-cleavage classification and its application to natural and model fold studies: Geological Journal, v. 17, p. 49-64.
Treagus, S.H., 1987, Mohr circles for strain, simplified: Geological Journal, v. 22, p. 119-132.
Turner, F.J. & L.E. Weiss, 1963, Structural analysis of metamorphic tectonites: McGraw-Hill, New York, 545 p. S.H. Treagus, J.E. Treagus 2001:Effects of object ellipticity on strain, and implications for clast-matrix rocks J Struct Geol pp 601-608 S.H. Treagus 2001:Flattening in shear zones under constant volume: a theoretical evaluation J Struct Geol pp 608-618

V
Vacher, H.L., 1989, The three-point problem in the context of elementary vector analysis: Journal of Geological Education, v. 37, p. 280-287.
Versteeg, J.K., & W.A. Morris, 1994, Pitfalls and procedures for determining fabric orientation in non-oriented bore cores: Journal of Structural Geology, v. 16, p. 283-286.
Visser, R.L.M., & B. Bollegraaf, 1989, An algorithm for rotation of axial data: Computers & Geosciences, v.. 15, p. 157-161.
Vollmer, F.W., 1988, An application of eigenvalue methods to structural domain analysis: Geological Society of America Bulletin, v. 102, p. 786-791.

Warner, Jeffery, 1969, FORTRAN IV program for construction of pi-diagrams with the Univac 1108 computer: Computer Contributions, Lawrence, Kansas.
Watkinson, A J, 1981: Patterns of fold interference, influence of early fold shapes. J. Struct. Geol., 3, 19-23
Watson, D.F., 1992, Contouring, a guide to the analysis and display of spatial data: Pergamon Press, Oxford, 321 p.
Watson, D.F., 1994, : An Implementation of Natural Neighbor Interpolation: David Watson, P.O. Box 734, Claremont, WA 6010, Australia, 170 p.
Watson, G.S., 1988, The computer simulation treatment of directional data: Recent Researches in Geology, Geological Survey of Canada, v. 12, p. 19-23.
Weaver, J.D., 1975, Slickensides and slickenlines: Geological Magazine, v. 112, p. 400-408.
Weijermars, Ruud, 1982, Definition of vergence: Journal of Structural Geology, v. 4, p. 505.
Weijermars, Ruud, 1997, Pulsating oblate and prolate three-dimensional strains: Mathematical Geology, v. 29, p. 17-41.
Weijermars, Ruud, 1997c, Structural geology and map interpretation: Alboran Science Publishing, Amsterdam, 378 p.
Weinberger, Ram, Amotz Agnon, Hagai Ron & Zvi Garfunkel, 1995, Rotation about an inclined axis: three dimensional matrices for reconstructing paleomagnetic and structural data: Journal of Structural Geology, v. 17, p. 777-782.
Weiss, L.E., 1969, Flexural-slip folding of foliated model materials: in A.J. Baer & D.K. Norris, editors, Research in Tectonics, Geological Survey of Canada, Paper 68-52, p. 294-357.
Wellman, H.G., 1962, A graphic method for analysing fossil distortion caused by tectonic deformation: Geological Magazine, v. 99, p. 348-352.
Wernicke, Brian & B.C. Burchfiel, 1982, Modes of extensional tectonics: Journal of Structural Geology, v. 4, p. 105-115.
Whisonant, R.C., & C.F. Watts, 1989, Using dip vectors to analyze structural data: Journal of Geological Education, v. 37, p. 187-189.
Wickham, John & George Moeckel, 1997, Restoration of structural cross-sections: Journal of Structural Geology, v. 19, p. 975-986.
Wilkinson, P., N.J. Soper & A.M. Bell, 1975, Skolithos pipes as strain markers in mylonites: Tectonophysics, v. 28, p. 143-157.
Williams, G.D., 1984, The calculation of horizontal thrust transport using excess area in cross-sections: Tectonophysics, v. 104, p. 177-182.
Williams, G.D., & T.J. Chapman, 1979, The geometrical classification of noncylindrical folds: Journal of Structural Geology, v. 1, p. 181-185.
Williams, G.D., & T.J. Chapman, 1983, Strains developed in the hanging walls of thrusts due to their slip/propagation rate: a dislocation model: Journal of Structural Geology, v. 5, p. 563-571.
Williams, P.F., L.B. Goodwin & Steven Ralser, 1994, Ductile deformation processes: in P.L. Hancock, editor, Continental deformation, Pergamon Press, p. 1-27. P.F. Williams, D. Jiang: 2000 :The role of initial perturbations in the development of folds in a rock-analogue J Struct Geol , pp 845-856 Wilson, Gilbert, 1961, Tectonic significance of small scale structures and their important to the geologist in the field: Annales de la Société Géologique de Belgique, v. 84, p. 423-548.
Wilson, Gilbert, 1967, The geometry of cylindrical and conical folds: Proceedings of the Geologists Association, v. 78, p. 179-210.
Wilson, Gilbert, 1982, Introduction to small-scale geological structures: George Allen & Unwin, London, 128 p. [revision of Wilson, 1961]
Wiltschko, D.V., & W.M. Chapple, 1977, Flow of weak rocks in Appalachian Plateau folds: American Association of Petroleum Geology Bulletin, v. 61, p. 653-670.
Wise, D.U., D.E. Dunn, J.T. Engelder, P.A. Geiser, R.D. Hatcher, S.A. Kish, A.L. Odom & S. Schamel, 1984, Fault-related rocks: Suggestions for terminology: Geology, v. 12, p. 391-394.
Wojtal, Stephen, 1988, Objective methods for constructing profiles and block diagrams: in Stephen Marshak & Gautam Mitra, editors, Basic methods of structural geology, Prentice-Hall, Englewood Cliffs, New Jersey, p. 269-302.
Wojtal, Stephen & Jonathan Pershing, 1991, Paleostresses associated with faults of large offset: Journal of Structural Geology, v. 13, p. 49-62.
Woodcock, N.H., & C. Schubert, 1994, Continental strike-slip tectonics: in P.L. Hancock, editor, Continental deformation, Pergamon Press, p. 251-263.
Woodward, N.B., S.E. Boyer & John Suppe, 1985, An outline of balanced cross-sections: Studies in Geology 11, Department of Geological Sciences, University of Tennessee, Knoxville, 170 p.
Woodward, N.B., S.E. Boyer & John Suppe, 1989, Balanced geological cross-sections: an essential technique in geological research and exploration: Short Course in Geology: v. 6, American Geophysical Union, 132 p.

Y
Yow, J.L., Jr., 1987, Blind zone in the acquisition of discontinuity orientation data: International Journal of Rock Mechanics and Mining Science & Geomechanical Abstracts, v. 24, p. 317-318.
Yu, H., & Y. Zheng, 1984, A statistical analysis applied to the method: Tectonophysics, v. 110, p. 151-155.

Z
Zhang, Hubao & Marcia Bjørnerud, 1995, A Mackintosh application program for simulating shear-sense indicators using object-oriented programming: Computers & Geosciences, v. 21, p. 365-375.
Zimmer, P.W., 1963, Orientation of small diameter drill core: Economic Geology, v. 28, p. 1313-1325.
Zoback, M.L., 1992, First and second order patterns of stress in the lithosphere: The World Stress Map Project: Journal of Geophysical Research, v. 97, p. 11703-11728.

Further Reading